Horner-apg X Series Add-Ons|Automation Control|Automation Solutions

XL Series add-ons

Currently only models with I/O card on board (all except models 100 & 200) will support these add-ons.

Profibus Card

Profibus DP Slave add-on will make your XL-series unit visible on the existing Profibus network and can be used as a gateway, local-level PLC or entry-type unit.

Transmission rate from 9.6k to 12M bits/second
Up to 232 Bytes IN and OUT
Cyclic polling

GSM/GPRS Modem

Connectivity with Cscape - Modify & Debug the application remotely
Data exchange - Monitor and Update the data via OPC or Scada applications
Peer-to-peer communication - Exchange the data with another OCS unit
Remote access - Transfer files and View remotely by using Envision FX & RV software from Horner
Support for the standard AT command set
GPRS/GSM Client and Server Mode*
Email over GPRS*.

*12.70 Firmware combined with the new Revision D GSM/GPRS modem
supports : SMS and GPRS server mode.
To use the : GPRS client mode, Email, GSM Server-Client mode
Requires a firmware update to 12.75 beta.
Please contact: tech.support@hornerapg.com for details

Ethernet Card

Connectivity with Cscape - allows remote programming, monitoring and debugging
Data exchange - remote data monitoring and transfers via OPC or Scada applications
Remote access - transfer files and view remotely by using Envision FX & RV software from Horner

PSTN Modem

Connectivity with Cscape - allows remote programming, monitoring and debugging
Connection to a dial-up network at speeds of up to 14.4 kbps
Support for the standard AT command set
Status LEDs which provide indications of Enabled, Carrier Detect and Receive/Transmit Data
Remote access - transfer files and view remotely by using Envision FX & RV software from Horner

Integrated I/O Cards for XL series

Designed for XL series, new range of IO add-on cards will allow to expand your XL series controller by a few extra IO points. Applying this add-on still leaves both serial ports available for the user.

Currently available:

2 channel & 4 channel Analog Output Module (HE-XDAC007 & HE-XDAC107)

Add-on interface kit

Adapter kit designed for XL series no-IO models.

It allows the use of the XL Series add-on modules on 'no I/O' models and also supplies an alternative connector for models 4 and 5 I/O types where the standard connector supplied with the unit interferes with the add-on module connector.